 |
ZKLDF395 395*525*65mm ZKLDF Series Rotary Table Bearings
ZKLDF395 395*525*65mm ZKLDF Series Rotary Table Bearings
| bearing type | d | D | H | H1 | D1 | D2 | J | J1 | inner ring | outer ring | ||||
| unit: mm | d1 | d2 | a | Qty | d3 | Qty | ||||||||
| mm | mm | |||||||||||||
| ZKLDF395 | 395 | 525 | 65 | 43 | 486 | 450 | 415 | 505 | 9.3 | 15 | 8.2 | 46 | 9.3 | 45 |
| bearing type | Number of retaining screws | Extraction thread hole | Number of pitches X angle of pitches | Screw tightening torque | Basic load rating | Limiting speed | Bearing frictional torque | weight | ||
| MA2) | axial dynamic load | static load | grease | |||||||
| G | Qty | Qty×t | Nm | Ca KN | Coa KN | r/min | Nm | Kg | ||
| quantity | ||||||||||
| ZKLDF395 | 2 | M12 | 3 | 48×7.5° | 34 | 241 | 1580 | 800 | 16 | 39 |
Compared with general bearings, ZKLDF has its own characteristics of low friction, high rotation accuracy, high speed limit, etc. It can also withstand high axial and radial loads and has high tilt stiffness. Thanks to so many advantages and features, ZKLDF is also suitable for the field of load load and high precision. Medical equipment, high-precision turntables, and high-precision test equipment all require the use of ZKLDF.
Compared with ordinary bearings, ZKLDF series bearings must be cautious in use and operation due to the high precision of the bearings, otherwise it will directly affect its operating life. ZKLDF series bearings are filled with grease, so they can be used directly during installation. In the initial stage of use, the frictional torque of the bearing will be relatively large because of the resistance of the grease. After running for a while, the excess grease will overflow and the torque will return to normal.
The accuracy of the ZKLDF bearing also requires the precision of the shaft and the housing, and the requirements for them are also very high. In order to achieve the desired accuracy, the clearance should be as close as possible to zero in order to achieve its maximum operating efficiency.
ZKLDF also pays attention to the surrounding working environment when handling and installing. The mounting force can only be used in the bearing rings that need to be installed. It does not need to be applied to other parts of the bearing. The bearings are also stored in a clean, ventilated, non-corrosive environment.
Share this product to:
Let more people see your product
-
- 3E907KAT2 37*50*8mm Robots Flexible Bearings Harmonic Drive Strain Wave Gear
- Flexible bearings for harmonic reducer are mainly used in harmonic reducer. Harmonic
-
- 128718K 90*170*380mm Mud motor bearings: multi-row bearings made from special steel
- Our main bearings products including bearings of petroleum screw drilling tools, equal-wall-thickness
-
- YRT50 50*126*30mm Rotary Table Bearing
- YRT rotary table bearings belong to an ultra-precision grade bearing, so
-
- YRT80 80*146*35mm Rotary Table Bearing
- YRT rotary table bearings belong to an ultra-precision grade bearing, so
-
- MTSV7000 full ceramic turbojet bearings for the model gas jet turbine
- MONTON can supply full ceramic turbine bearings for the model gas jet
-
- F0182293 - 804753 N226E.M1 360005 400×500×46mm Morgan bearing SMS Meer High Speed Wire Rolling Mill Bearings
- The wire Rolling Mill Bearings must meet continuous operation requirements under High-Speed
-
- MTSV708 8×22×7mm Turbojet bearing AMT NETHERLANDS (JET TURBINES) BEHOTEC (JET TURBINES)
- he standard size bearing has been used persistently during the development
-
- MTSV788 8×16×6mm Turbojet bearing ceramic ball full compeletment
- he standard size bearing has been used persistently during the development
