-
- RAU2005 20*31*5mm crossed roller bearing for Hollow shaft ge...
- In the RAU, the rollers travel on the V-shaped raceways ground into the inner and outer rings. Alternating rollers are arrayed orthogonally so that one bearing can support loads and moments in any dir
-
- RAU1505 15*26*5mm cross roller bearing for Robot arm gearbox...
- In the RAU, the rollers travel on the V-shaped raceways ground into the inner and outer rings. Alternating rollers are arrayed orthogonally so that one bearing can support loads and moments in any dir
-
- RAU1005 10*21*5mm high rigidity precision cross roller beari...
- In the RAU, the rollers travel on the V-shaped raceways ground into the inner and outer rings. Alternating rollers are arrayed orthogonally so that one bearing can support loads and moments in any dir
-
- XU300515 384*646*86mm Crossed roller Bearing
- With the Cross-Roller Ring, cylindrical rollers are arranged with each roller perpendicular to the adjacent roller, in a 90° V groove, separated from each other by a spacer retainer. This design allow
-
- XU080430 380*480*26mm Crossed roller Bearing
- With the Cross-Roller Ring, cylindrical rollers are arranged with each roller perpendicular to the adjacent roller, in a 90° V groove, separated from each other by a spacer retainer. This design allow
-
- XU160405 336*474*46mm Crossed roller Bearing
- With the Cross-Roller Ring, cylindrical rollers are arranged with each roller perpendicular to the adjacent roller, in a 90° V groove, separated from each other by a spacer retainer. This design allow
-
- XU080264 215.9*311*25.4mm Crossed roller Bearing
- With the Cross-Roller Ring, cylindrical rollers are arranged with each roller perpendicular to the adjacent roller, in a 90° V groove, separated from each other by a spacer retainer. This design allow
-
- XU160260 191*329*46mm Crossed roller Bearing
- With the Cross-Roller Ring, cylindrical rollers are arranged with each roller perpendicular to the adjacent roller, in a 90° V groove, separated from each other by a spacer retainer. This design allow
-
- XU120222 140*300*36mm Crossed roller Bearing
- With the Cross-Roller Ring, cylindrical rollers are arranged with each roller perpendicular to the adjacent roller, in a 90° V groove, separated from each other by a spacer retainer. This design allow
-
- XU120179 124.5*234*35mm Crossed roller Bearing
- With the Cross-Roller Ring, cylindrical rollers are arranged with each roller perpendicular to the adjacent roller, in a 90° V groove, separated from each other by a spacer retainer. This design allow
-
- XU080149 101.6*196.85*22.22mm Crossed roller Bearing
- With the Cross-Roller Ring, cylindrical rollers are arranged with each roller perpendicular to the adjacent roller, in a 90° V groove, separated from each other by a spacer retainer. This design allow
-
- XU060111 76.2*145.79*15.87mm Crossed roller Bearing
- With the Cross-Roller Ring, cylindrical rollers are arranged with each roller perpendicular to the adjacent roller, in a 90° V groove, separated from each other by a spacer retainer. This design allow
