Tandem Thrust Bearing M4CT140360 140*360*424mm

 tandem thrust bearing with shaft factory supply M4CT140360 140*360*424mm

Tandem thrust bearings M4CT140360 are designed to be used in horizontal shaft applications (extruder gear drives) and it is essential that a sufficient thrust load be applied to prevent roller slip. Typically, the minimum load required is expressed as a ratio of the bearing’s dynamic load rating (C)to the applied load (P). Loads representing C/P > 12 must be avoided and  loads where C/P falls between 8 and 12 should be avoided. M4CT140360  is 4 stages thrust roller bearing with inner dia:140mm size,outer  diameter:360mm ,the height:424mm

Tandem bearings offer an optimum solution wherever the following requirements apply:

■ small radial design envelope

■ high axial forces

■ long operating life

■ low frictional energy.

Tandem bearings have proven effective principally in gearboxes for single and twin screw extruders in the rubber and plastics industry.

Other possible applications include:

■ deep hole drilling equipment

■ friction welding machines.