 |
Technical Parameters:
Product Designations:
51244
Structure:
Thrust ball bearing
Inside Diameter:
220 mm
Outside Diameter:
300 mm
Thickness:
37 mm
Brand:
JHB
Precision Rating:
P5
Bearing Material:
GCr15SiMn
Seals Type:
no
Single-direction thrust ball bearing consists of one row of balls (with cage), a shaft washer (close fit with shaft) and a housing ring (loose fit with shaft and close fit with bore of bearing block). They can’t carry radial loads but axial loads in one direction,because the axial loads are well distributed on each ball, the loading capacity is higher, but the temperature is high while working,and their limiting speed is lower.
Thrust ball bearings can limit axial displacement of shafts or housings in one or twe directions, but not radial displacement. Therefore, the bearings are usually used with deep groove ball bearings.
While mounting, the shaft and axis of housing bore must be concentric, otherwise bearing will be damaged in early period because of the stress concentration,and 0.5-1 mm radial clearance between outside diameter and bore of housing washer should be kept to avoid the influence.
Steel pressed cages are usually used in thrust ball bearings; machined solid cages shoule be used when outer diameter is over 250mm.
Designations
Current Original
51132 8132
51232 8232
51332 8332
51134 8134
51234 8234
51334 8334
51136 8136
51236 8236
51336 8336
51138 8138
51238 8238
51338 8338
51140 8140
51240 8240
51340 8340
51144 8144
51244 8244
51148 8148
51248 8248
51348 8348
51152 8152
51252 8252
51156 8156
51256 8256
51160 8160
51260 8260
51164 8164
51264 8264
51168 8168
51268 8268
51368 8368
51172 8172
51272 8272
51176 8176
51276 8276
51180 8180
51280 8280
51184 8184
51784 8784
51188 8188
59188/YB2 9008188
51288 8288
51192 8192
51292 8292
51196 8196
51396 8396
511/500 81/500
512/500 82/500
593/500 90083/500
511/530 81/530
590/560 90089/560
591/600 90081/600
512/630 82/630
510/670 10089/670
511/670 81/670
591/710 90081/710
572/710 70082/710
592/710 90082/710
591/750 90081/750
517/780 87/780
510/800 10089/800
591/800 90081/800
511/800 81/800
510/850 10089/850
591/850 90081/850
511/850 81/850
510/900 10089/900
591/900 90081/900
511/900 81/900
510/950 10089/950
591/950 90081/950
511/950 81/950
510/1000 10089/1000
591/1000 90081/1000
511/1000 81/1000
510/1060 10089/1060
591/1060 90081/1060
511/1060 81/1060
511/1120 81/1120
511/1180 81/1180
511/1400 81/1400
Share this product to:
Let more people see your product
-
- Single row direction thrust ball bearing 51244
- Single-direction thrust ball bearing consists of one row of balls (with cage),
-
- Heavy industry Thrust ball bearing 51188
- ID:440 OD:540 Total height: 80 weight :42kgs We can manufacture them to P5 P4 Class. The material is
-
- AH2238G withdrawal sleeve(matched bearing:22238CCK,22238CAK,22238CCK/W33, C2238K)
- Description::withdrawal sleeve Type:AH2238G withdrawal sleeve Dimension:180x190x117 mm/Metic ID(inner diameter)/Bore: 180 mm OD(outer diameter):190 mm Width/Height/thickness:117mm Removal Nut:KM40 Hydraulic
-
- AOH24056G(24056CCK30/W33, 24056CCK, 24056CAK30/W33 Bearing withdrawal sleeve)
- Description::withdrawal sleeve Type:AOH24056G withdrawal sleeve Dimension:260x280x179 mm/Metic ID(inner diameter)/Bore: 260 mm OD(outer diameter):280 mm Width/Height/thickness:179 mm Removal
-
- VLA200414N slewing ball bearing 503.3x304x56mm with teeth
- The outer diameter:503.3mm,Inner diameter:304mm,Height:56mm, It is the light series bearing structure
-
- VLA 200544 N bearing 640.3x434x56mm for bucket wheel excavators
- The VLA 200544 N bearing outer diameter:640.3mm,Inner diameter:434mm,Height:56mm, It is the light
-
- VLA200644N Slewing bearing 742.3x534x56mm for conveyor booms
- The VLA 200644 N bearing outer diameter:742.3mm,Inner diameter:534mm,Height:56mm, It is the
-
- VLA200744N bearing 838.1x634x56mm for large excavators equipment
- The VLA 200744N bearing outer diameter:838.1mm,Inner diameter:634mm,Height:56mm, It is the light series
