SDGC 41/500 Bearing Housing

SDG series plummer is recommended for very heavy duty services and continuous operation. Stringently checked and tested, these come in horizontal split type with end covers and four mounting holes of oval shape. It’s necessary to specify requirement for located bearing type or non-located bearing type because loose locating rings are not used. The shaft diameter is from 125mm to 530mm.

SDG series Specifications:

Shaft dia:125 to 530 mm

Material: cast iron fg 260 - is 210, 1993 (iso/r 185-1961,grade25)

Seal: labyrinth or felt

Lubrication: grease

Additional Features: End cover for closed end.

Material:

cast steel : sdgs

s. G. Iron : sdgd

Located or non located bearing

For bearings with withdrawal sleeve:sdgc3100 d

For bearing with cylindrical bore on stepped cyl shaff: sdgc3100 g

For bearing with adapter sleeve for stepped shaft: sdgc 3100 c v-seal as supplementary seal.

Water jacketed sdg 3100 wj housings are available for high temperature application.

For bearing housings where strength of grey cast iron material is still inadequate, these housings can also be supplied in cast steel or spheroidal graphite iron (ductile). Such bearing housings can support approximately twice the load permitted for grey cast iron housings.