RE18025UUCCO Crossed Roller Bearings (180x240x25mm) High Precision Robotic Arm Use

Get Latest Price

Min. Order:

1 Piece

Payment term:

T/T

Delivery time:

IN STOCK

Technical Parameters:

Product Designations:

RE18025UUCCOP5

Structure:

crossed roller

Inside Diameter:

180 mm

Outside Diameter:

240 mm

Thickness:

25 mm

Weight:

3.44 KG

Precision Rating:

1.5 μ

Bearing Material:

GCR15/GCR15SiMn

Seals Type:

rubber seals

RE18025Crossed Roller Bearings Specification Sheet
Model Number	Main dimensions						Mounting dimensions		Basic load rating (radial)		weight
	Inner ring d (mm)	Outer ring D(mm)	Roller pitch circle dp(mm)	Width B(mm)	Greasing hole φ	Chamfer r(min)	ds	Dh	C kN	C0 kN	Kg
RE18025	180	240	210	25	3.5	2	195	225	84	143	3.44

C . RE type Crossed Roller Bearings Details

Product Features:YADIAN Crossed roller bearings are lightweight, compact bearings with thinnest possible inner and outer rings with high rigidity, because of its vertical arrangement of cylindrical rollers with a 90°V groove through the separate spacers in the deep groove rolling surface. This special design allows just one bearing to carry loads in all directions including radial, axial and moment loads.

Series Introduction:RE standard type is an innovative bearing based on the design of the RB standard type bearing. The inner ring is separable while the outer ring is integrated into the main body. It is being used in cases where the high rotational accuracy of the outer ring is required.

Series Model No:

RE4010,RE4510,REB5013,RE6013,RE7013,RE8016,RE9016,RE10016,RE10020,RE11012,RE11015,RE11020,RE12016,RE12025,RE13015,RE13025,RE14016,RE14025,RE15013,RE15025,RE15030,RE16025,RE17020,RE18025,RE19025,RE20025,RE20030,RE20035,RE22025,RE24025,RE25025,RE25030,RE25040,RE30025,RE30035,RE30040,RE35020,RE35025,RE40035,RE40040,RE45025,RE50025,RE50040,RE50050,RE60040

Applications:

Product Application

•Industrial Robotic arm,Reducer drive

•precision Turntable,NC rotary table

•Rotation part of Machine tools

•Inspection instrument,Medical equipment

• Aviation equipment,Military radar etc

D . RE type Crossed Roller Bearings Installation & Cautions

1.Inspect the parts before installing:Clean bearing bracket,main axle or other parts to remove dirt or grease.

2.Place the bearing into the bearing bracket and main axle:To match the design clearance ,keep the bearing horizontal and insert the bearing into the bearing bracket or axle.If it is hard to install,use a rubber hammer to slightly hit every part of the bearing,so that the bearing can be attention to the hitting force is too large.Afterwards,the matching status of bearing and basic face can be examined by checking the noise.For a interference fit,use heating or cooling to expand or shrink the parts for ease of installation. Be sure the bearing temperature does not exceed 80℃ . If the split inner or outer ring is Separates, please loosen the blots slightly and rotate the monolithic ring to adjust the part of split ring, so that the bearing can be fit in the bracket.

3.Install the mounting disc:Place the mounting disc onto the bearing and align the screw holes, Screw all the bolts in the holes first and follow the orders show in below diagram when tightening bolts in diagonally opposite sequence,Do not tighten bolts randomly.

Cautions:

1.The normal operating temperature of Crossed roller bearing is 10-80℃, If it is over this range,please contact YADIAN.

2.If a foreign substance enters inside the bearing structure, the rotation route of the roller may be damage, or the bearing may fail.Please clean the bearing by refill the lubricant grease.

3.Please do not remove or apply force to the bolt and nut of the split bearing.

E . RE type Crossed Roller Bearings Shipping And Payment

YADIAN Bearing Service

1.Your inquiry to our product & price will be replied within 24 hours.

2.OEM & ODM projects are highly welcomed. We have strong R&D team here to help.

3.Your business relationship with us will be confidential to any third party. These bearings are slim bearings having a small outside diameter, in comparison with the bore diameter, and a narrow width. The type with cage and the type with separator provide smooth rotation and are suit-able for applications where rotational speed is comparatively high.

The main products of YADIAN are crossed roller bearings, YRT rotary table bearings, crossed tapered roller bearings, Thin section ball bearings,Angular contact ball bearings,cylindrical roller thrust bearings. The leading products include crossed roller bearing RB, RE, RU,RA,CRBC, CRBH, XSU, SX series, rotary table bearings YRT, YRTS,YRTM,ZKLDF series, crossed tapered roller bearing JXR, XR series, cylindrical roller thrust bearing Feature of Crossed Roller Bearing

1. High accuracy and load capacity. Precision ground V grooved ways and rollers.

2. Withstands force in any direction. Alternately crossed rollers 45º angle.

3. Easy Installation and get used to small spaces. Threaded mounting holes in standard pattern.

4. Factory p reload for minimum axial play and low coefficient of friction. Shipping And Payment

1. Industrial Neutral Packing,Package as your requirements.

2. Small size Bearings:Plastic vacuum packaging bag+Paper Box/Neutral Carton

3.Large size Bearings:Plastic film+ paper+Roll tape+Wooden Box

4.Shipping:By air or By sea:DHL/TNT/UPS/EMS etc

5.Min.Order Quantity: 5 Piece/Pieces

6.Supply Ability: 1500 Units/Year

7.Port:SHANGHAI,HK,Guangzhou

8.Payment Terms:T/T

YADIAN Bearrings, Crossed roller bearing , Thin section bearing , Turntable bearing , Roller Bearing ,Bearing ,Slewing bearing ,Robotic bearing ,Rotary Table Bearing , YRT Rotary Table Bearing ,Angular Contact Ball Bearing,Thin section ball bearing

Share this product to:

Let more people see your product

How can you buy RE18025UUCCO Crossed Roller Bearings (180x240x25mm) High Precision Robotic Arm Use on the Internet?
High quality RE18025UUCCOP5 ( 3.44 kg Mass, ID: 180 mm OD: 240 mm WD: 25 mm , 1.5 μ Accuracy Class , GCR15/GCR15SiMn Material ), Just click the button " Contact Now " to mention your purchase Requirement , Quantity and Contact Method of your requested Bearing Item No. RE18025UUCCOP5. then click the button " Send " The web site will make your purchasing information sent to the supplier's mailbox, who will come to contact you upon they get your information at the first time.

- RB16025UUCCO Crossed Roller Bearings (160x220x25mm) Precision Robotic arm use
- RB16025 Crossed roller bearings are lightweight, compact bearings with thinnest possible inner
- RB17020UUCCO Crossed Roller Bearings (170x220x20mm) Precision Robotic arm use
- RB17020UUCCO type is a bearing with thinnest possible inner and outer rings
- RB18025UUCCO Crossed Roller Bearings (180x240x25mm) Precision Robotic arm use
- RB18025UUCCO type is a bearing with thinnest possible inner and outer rings
- RB19025UUCCO Crossed Roller Bearings (190x240x25mm) Precision Robotic arm use
- RB19025UUCCO type is a bearing with thinnest possible inner and outer
- RB16025UUCCO Crossed Roller Bearings (160x220x25mm) Precision Robotic arm use
- RB16025 Crossed roller bearings are lightweight, compact bearings with thinnest possible inner
- RB17020UUCCO Crossed Roller Bearings (170x220x20mm) Precision Robotic arm use
- RB17020UUCCO type is a bearing with thinnest possible inner and outer rings
- RB18025UUCCO Crossed Roller Bearings (180x240x25mm) Precision Robotic arm use
- RB18025UUCCO type is a bearing with thinnest possible inner and outer rings
- RB19025UUCCO Crossed Roller Bearings (190x240x25mm) Precision Robotic arm use
- RB19025UUCCO type is a bearing with thinnest possible inner and outer

RE18025UUCCO Crossed Roller Bearings (180x240x25mm) High Precision Robotic Arm Use

RE18025UUCCO Crossed Roller Bearings (180x240x25mm) High Precision Robotic Arm Use

RE18025UUCCOP5 Related Products »

Product Groups

Information

Category