 |
Technical Parameters:
Product Designations:
FC-10
Structure:
open-end
Inside Diameter:
10 mm
Outside Diameter:
16 mm
Thickness:
12 mm
Brand:
CWHY
Bearing Material:
bearing steel
1.The drawn cup needle clutch HF series is composed of thin wall punched outer ring and plastic retainer .
2.There is a clamping slope which holds the needles tightly on the inclined surface of the alloy steel punched out ring.
3.Through fitting drawn cup needle roller bearing HK,SCE series of the same diameter on the two sides of drawn cup needle clutch ,better supporting rigidity and rotation characteristics are achieved.
Share this product to:
Let more people see your product
-
- One-way Needle Roller Clutch bearing HF081412
- I.one way bearing 2.with sreel spring or plastic spring on cages 3.Stable structure,can make
-
- Drawn Cup Roller Clutches and Bearing Assemblies HFL3530
- I.one way bearing 2.plastic cages 3.high abrasion resistance and load capacity
-
- One-way Needle Roller Clutch Bearing FC-10
- I.drawn cup needle clutch 2.plastic cages 3.high abrasion resistance and load capacity 4.straight body
-
- Drawn Cup Roller Clutch and Bearing Assemblies FCB25
- I.drawn cup needle clutch 2.plastic cages 3.high abrasion resistance and load capacity 4.three rows
