NU210-E-TVP2 Cylindrical Roller Bearing

Single row cylindrical roller bearings with cage are units comprising solid inner and outer rings together with cylindrical roller and cage assemblies. The outer rings have rigid ribs on both sides or no ribs, the inner rings have one or two rigid ribs or are designed without ribs. The cage prevents the cylindrical rollers from coming into contact with each other during rolling

Cylindrical roller bearings NU and N are non-locating bearings and can support radial forces only. In series NU, the outer ring has two ribs, while the inner ring has no ribs. Bearings N have two ribs on the inner ring and an outer ring without ribs.

Bearings with a plastic cage (suffix TVP2) are suitable up to +120 °C; the operating life is heavily dependent on the lubricant used.

C3: Radial internal clearance larger than normal by agreement
C4: Radial internal clearance larger than C3
J30P:  Black oxide coated
E : Increased capacity design
EX Increased capacity design, design modified in accordance with standard (parts from these bearings must not be interchanged with parts from bearings of the same size of the previous design E)
M1 :Solid brass cage, two-piece, roller-guided
TVP2  Solid window cage made from glass fibre reinforced polyamide PA66
JP3 :Sheet steel window cage, single-piece, roller-guided
MP1A : Solid brass cage, single-piece, rib-guided on outer ring
MP1B :Machined brass cage, single-piece, rib-guided on inner ring
M1A :Solid brass cage, two-piece, rib-guided on outer ring
M1B :Solid brass cage, two-piece, rib-guided on inner ring