-
- HCB7007-E-T-P4S bearing 35×62×14mm
- Spindle bearings HCB7007-E-T-P4S adjusted, in pairs or sets, contact angle α = 25°, with ceramic balls, restricted tolerances
-
- HCB7007-E-2RSD-T-P4S bearing 35×62×14mm
- Spindle bearings HCB7007-E-2RSD-T-P4S adjusted, in pairs or sets, contact angle α = 25°, with ceramic balls, lip seals on both sides, non-contact, restricted tolerances
-
- HCB7007-C-T-P4S bearing 35×62×14mm
- Spindle bearings HCB7007-C-T-P4S adjusted, in pairs or sets, contact angle α = 15°, with ceramic balls, restricted tolerances
-
- HCB7007-C-2RSD-T-P4S bearing 35×62×14mm
- Spindle bearings HCB7007-C-2RSD-T-P4S adjusted, in pairs or sets, contact angle α = 15°, with ceramic balls, lip seals on both sides, non-contact, restricted tolerances
-
- HC7007-E-T-P4S bearing 35×62×14mm
- Spindle bearings HC7007-E-T-P4S adjusted, in pairs or sets, contact angle α = 25°, with ceramic balls, restricted tolerances
-
- B7007-E-T-P4S bearing 35×62×14mm
- Spindle bearings B7007-E-T-P4S adjusted, in pairs or sets, contact angle α = 25°, restricted tolerances
-
- B7007-E-2RSD-T-P4S bearing 35×62×14mm
- Spindle bearings B7007-E-2RSD-T-P4S adjusted, in pairs or sets, contact angle α = 25°, lip seals on both sides, non-contact, restricted tolerances
-
- HCS7006-E-T-P4S bearing 30×55×13mm
- Spindle bearings HCS7006-E-T-P4S 30×55×13mm adjusted, in pairs or sets, contact angle α = 25°, with ceramic balls, lip seals on both sides, non-contact, restricted tolerances
-
- HS7006-C-T-P4S bearing 30×55×13mm
- Spindle bearings HS7006-C-T-P4S adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances
-
- HS7006-E-T-P4S bearing 30×55×13mm
- Spindle bearings HS7006-E-T-P4S adjusted, in pairs or sets, contact angle α = 25°, restricted tolerances
-
- HSS7006-C-T-P4S bearing 30×55×13mm
- Spindle bearings HSS7006-C-T-P4S adjusted, in pairs or sets, contact angle α = 15°, lip seals on both sides, non-contact, restricted tolerances
-
- HSS7006-E-T-P4S bearing 30×55×13mm
- Spindle bearings HSS7006-E-T-P4S adjusted, in pairs or sets, contact angle α = 25°, lip seals on both sides, non-contact, restricted tolerances
