-
- RASEY1-15/16 Plummer block housing unit
- Product data of RASEY1-15/16 d= 1 15/16 inch L= 7,972 inch H2= 4,606 inch A= 2,244 inch
-
- GRAE50-NPP-B Radial insert ball bearing
- Product data of GRAE50-NPP-B Bore dia.: 50 mm OD: 90 mm Width: 43.8 mm Mass: 0.77 kg Basic dynamic load rating: 35 kN Basic static load rating: 23.2 kN
-
- UCF207D1 Square flanged units cast housing set screw type
- UCF207D1 Square flanged units cast housing set screw type Shift diameter= 35 mm L=117 mm A=34 mm B= 42.9 mm Bolt size: M12 Bearing Number: UC 207D1 Housing Number: F207D1 Weight: 1.5 kg
-
- UCF315 pillow block bearing
- Pillow Block Bearing are included many different types, included UCP, HCP, UCLP, UKP, UCPX and UKPX series.
-
- UCP215 D1 pillow block bearing
- UCP215D1 is pillow block bearing unit, it composed of a radial ball bearing, seal and a housing of high-grade case iron or pressed steel. The unit is self-aligning, the outer surface of the bearing and internal surface of the housing are both spheric ...
-
- UCFL212 pillow block bearing
- Pillow Block bearing UCFL212 UCF212 are very robust, ready-to-fit, versatile and economical, they are suitable for highly problematic environmental conditions such as severe contamination, stone impact, shocks.
-
- SD3152-H-TS-BF-L + 23152-K-MB Plummer block housing
- Split plummer block housings SD3152-H-TS-BF-L are supplied as a locating bearing design. Locating bearing arrangements can be achieved by the insertion of locating rings on both sides of the bearing.
-
- FSAF 22518 Split plummer block housing kit
- FSAF 22518 Split pillow blocks are made of cast iron with self-aligning spherical roller bearings 22218 EK on Adapter sleeve SNW 18X3.3/16 for heavy loads They have the following outstanding performance advantages:
-
- SAF 22528 Pillow Block Assembly
- SAF housings are designed for heavy-duty operation in conveyors, mining, papermaking equipment as well as lighter duty and high speed service in fans, blowers and other applications.There is a large choice of seals meet nearly all application require ...
-
- SNL 508-607 Split plummer block housing 30x85x108mm
- SNL 508-607 Split plummer block housings are versatile, economical and trouble-free. They are supplied with a grease nipple for relubrication.
-
- SNL 518-615 Pillow block housing 65x140x194mm
- The housing base of SNL 518-615 is reinforced with ribs and extra material surrounding the holes for the attachment bolts in order to improve seating on the base plate. The attachment bolts can be preloaded to give better location and cannot deform t ...
-
- F210 Stainless Plummer Block Housing
- F210 Stainless Plummer Block Housing The pillow block ball bearing is composed of a single row of deep groove ball bearings with seals at both sides and spherical outside surface, and a housing, suitable for simple support, widely used in various of ...
