AS35 SINGLE WAY BEARINGS 35x72x17mm

ASNU35 SINGLE WAY BEARINGS 35x72x17mm
1 Ability to carry heavy loads
 
2 Less coefficient of friction

 
3 High limiting speed and lower noise

 
4 Large size range: inner Diameter from 15mm- 580mm 

 
5 variations of structure: inch,metric,single row
 
6.Neutral Package& wooden package&as customer request
 
7.Factory&Manufacturer
 
8.super quality&reasonable price
 
9.have large quantity stock
 

TYPE AS is a roller type freewheel non-bearing

supported.

Bearings are required to support axial

and radial loads. Lubrication and sealing must also be

provided by the installation. Nominal outside dimensions

are the same as series 62.. ball bearings.

A typical arrangement is to install this type alongside

a series 62 bearing within the same location tolerances,

as shown on the following page.

The inner race is keyed to the shaft (except 6 mm bore).

The outer race has a positive r6 tolerance to give a press fit

in a H7 housing. The outer housing must be strong enough

to not expand after assembly. This design can accept an

axial misalignment of inner and outer race of Å} S/2.