- Hello Customer - Log in or Register!
Bearings are precision parts, thus quite cautious attitude when in use, that is, change is the use of high-performance SKF bearings, if used improperly, they can not achieve the expected performance, and easy to make the SKF bearing damage. Therefore, the use of SKF bearings should note the following:
1, to maintain the cleanliness of the bearing and its surroundings
Even if invisible to the naked eye smile dust from entering the SKF bearings, will increase the bearing wear, vibration and noise.
2, using the installation to be carefully
Does not allow a strong punch, does not allow a direct hit with a hammer, SKF bearings, does not allow pressure by rolling the body pass.
3, the use of appropriate, accurate installation tool
Try to use a special tool, try to avoid using the cloth and staple fiber and the like.
4, to prevent the corrosion of the SKF Bearing
Hand pick SKF bearings, necessary to fully wash away the sweat of the hands, and coated with high quality mineral oil and then operate, with particular attention to anti-rust in the rainy season and summer.
However, in some special operating conditions, SKF Bearings can get longer life in the traditional computing, especially in the case of light load. These special operating conditions, when the rolling surface (track and rolling) to be an effective lubricant film separated and limit pollutants may cause surface damage. In fact, under ideal conditions, the so-called permanent bearing life is possible.
| Product Model | Inside Diameter | Outside Diameter | Thickness |
| 6324 NSK | 120 | 260 | 55 |
| 6224 NSK | 120 | 215 | 40 |