Vibration damage to the TIMKEN bearings can be said to be quite sensitive to indentation, rust, cracks, spalling, wear will be reflected in the TIMKEN bearing vibration measurement. So, by using a special measuring bearing vibration (frequency Analyzer, etc) can measure the size of the vibration, through frequency cannot be inferred from specific situations of exception. Measured value for TIMKEN bearings use conditions or different sensors such as installation location and therefore require prior to analysis and comparison of measurement values of each machine are determined criteria.
We went on to look at the influences of temperature on TIMKEN bearings, high temperature often indicates that the bearing is in exceptions. High temperatures may also be harmful to TIMKEN bearing lubricant. Sometimes bearing overheating can blame on the bearing lubricant. If bearings in more than 125 ℃ temperature long-term continuous transfers reduce bearing life. Cause of the high temperature TIMKEN bearings include: insufficient lubrication or excessive lubrication, lubricant. Contains impurities, excessive load, TIMKEN bearing loss rings, insufficient clearances, and oil have high friction and so on.
Therefore the continuity of the TIMKEN bearing temperature monitoring is necessary, whether measured or other important parts of the bearing itself. If operating conditions do not change case, any temperature changes may have occurred at fault.
TIMKEN bearing periodic measurement of temperature using a thermometer, such as digital thermometers for precision measuring and bearing temperature degrees centigrade or Fahrenheit units display. Importance of TIMKEN bearing to the effect that, when it is damaged, will cause the device to shut down, so this type of TIMKEN bearings should preferably install temperature probe.
Product Model | Inside Diameter | Outside Diameter | Thickness |
24092CAK30E4 NSK | 460 | 680 | 218 |
23092CAKE4 NSK | 460 | 680 | 163 |