- Hello Customer - Log in or Register!
Bearings for vibration motor replacement when reflected effect is different, and must be the same as the type of bearing, and effectiveness in this area, have a better meaning, so as to be able to reflect better results in this regard. First introduced in the context of the following bearing installation.
Replacement bearings for vibration motor, you must use the same as the type of bearing.
1) bearing kerosene washed, pressed into the bearing, roller bearing outer ring fill the shell full of lithium grease to, third, wash% 3C% 3E hands daub-uniform was loaded onto the Bearing cover, and apply locking bolts with adhesive fastening bolt clamping of Bearing cover;
2) bearings are separable sets of inside and outside cylindrical roller bearings should be set on the shaft and the bearing in place;
3) housings are mounted in the chassis, such as grease oiling holes must be at the location. And apply locking bolts with adhesive fastening bolt clamping bearings;
4) eccentric mounted on hinges and place both inside and outside, shaft key into the keyway shaft keys should be put outside the eccentric, retaining rings for shaft mounted on the hinge;
5) fixed eccentric fastening bolt, turn the adjustable eccentric so that it reaches the front of the angular position and tighten the fastening bolts. Above after Assembly is complete, the hinge should have a certain amount of axial;
6) vibration motors on both ends of the shield, fastening with screws.
Installation of bearing for vibration motor performance and other aspects of the effect it will be changed, but from a different point of view to take into account certain changes have been made in the form of results, slowly for all aspects of the installation also has a certain understanding of the situation.
| Product Model | Inside Diameter | Outside Diameter | Thickness |
| 7336B NSK | 180 | 380 | 75 |
| 7336A NSK | 180 | 380 | 75 |