- Hello Customer - Log in or Register!
TIMKEN bearings have a vibration problem in bearing a flag. TIMKEN bearings a relatively high quality bearings, vibration does not occur under normal circumstances. But if the vibration occurs, it means that bearings have very big problems. We need to check the bearings.
After a long period of practice summary and found then why several of the TIMKEN bearing vibration, which just give you a talk has the following reasons evoked bearing vibration have arisen?
1, when our local TIMKEN bearings damage may occur at the time of vibration: because the operation or installation errors, a small number of TIMKEN bearing raceways and rolling elements may be damaged. Running, scroll past the damaged bearing part generates a specific vibration frequency. Bearings vibration frequency analysis can identify damaged parts.
2, as the TIMKEN bearings not deformed when vibration may occur: snug fit between the bearing rings and bearings or shafts cases, bearing rings might dovetail shape and deformation of the adjacent parts. If the deformation occurs, there may be in the running vibration. Therefore, and drive shaft housings are machined to required tolerance is very important.
3, also have a vibrating behavior in applications, in many applications, the TIMKEN bearing stiffness and rigidity of the structure around the same. Because of this feature, as long as the proper selection of the bearing and its application in the configuration, it is possible to reduce vibrations in the application. According to site conditions and conditions of use and the environment used to select size, precision, combined with suitable bearing is a prerequisite to guarantee bearing life and feasibility.
Because it is all most important condition monitoring of rotating machinery parts in order to prevent the TIMKEN bearing damage, maintenance equipment to prevent unplanned downtime of bearing damage caused during an important part of early detection at home. But not all machines are equipped with the advanced equipment. In this case, the machine operator or maintenance engineers must adhere to bearing fault signal alert.
Many people early in the TIMKEN bearing vibration does not keep track of time. Time, however, long, is likely to cause fracture of bearing or even unusable. So we must focus on bearing vibration problem.
| Product Model | Inside Diameter | Outside Diameter | Thickness |
| 22336CAE4 NSK | 180 | 380 | 126 |
| 23236CE4 NSK | 180 | 320 | 112 |