- Hello Customer - Log in or Register!
TIMKEN bearings operating problems arising in the process, it is more difficult to deal with. Because improper handling, it will cause a TIMKEN bearing failures, and his life expectancy at the time. In General, our analysis from the bearing angle to note the following several points:
1. Appropriate bearing clearance, impact, too small, poor lubrication may result in its damage.
2. Bearings and axle geometry and surface quality should be strictly guaranteed.
3. Improving the quality of bearing lubrication, control pressure, temperature, enhanced cleaning and filtration.
4. Adopted in accordance with the provisions of lubricating oil for lubrication.
TIMKEN bearing creak creak of plastic bearing and its control methods in all occasions the possibility of harsh metal friction sound unpleasant, mostly in the larger models of grease lubrication bearings and functional deterioration of base oil in lubricating grease more easily, almost did not occur when the oil lubrication. In addition, easier in winter, when you are subjected to purely radial load, readily occur to the radial clearance, and with the size of different models, in the context of a particular speed easily, both continuous and batch flush. Rolling bearing external ring road for special processing methods can prevent the creak of the season, this bearing if necessary, or appropriate TIMKEN bearing radial clearance reduction, using the function go with bearing grease and progress of good mechanical rigidity.
| Product Model | Inside Diameter | Outside Diameter | Thickness |
| 7218CTYNDBLP4 NSK | 90 | 160 | 30 |
| 7011CTYNSULP4 NSK | 55 | 90 | 18 |