Date: 2013-08-20

TIMKEN bearing analysis of maintenance and repair methods

　The TIMKEN bearings maintenance, maintenance can ensure the reliability of operation, increase production, economy in order to prevent accidents, it is imperative, ensuring the reliability of operation, increase production, economy, and can guarantee the bearings in good condition to maintain original performance for a long time.
　　TIMKEN bearings cleaning: general use gasoline, kerosene as an ordinary cleaning agent. When removing bearings under overhaul, bearing the appearance of the first record, confirm that the residual amount of the lubricant, start wash bearings after sampling check of lubricants. Coarse cleaning cleaning cleaning and fine, placed in a container, metal mesh on the bottom first, TIMKEN bearings do not directly contact the dirt container.
　　1, heavy cleaning, use brushes to remove grease, stickers, generally after a clean, sperm washing. If you rotate the TIMKEN bearings with dirt, can damage the bearings of rolling surface, should be noted.
　　2, fine finishing wash is rotates the TIMKEN bearings in cleaning oil on one side, careful cleaning. In addition, cleansing oils are also frequently kept clean.
　　TIMKEN bearing maintenance and judgment: in order to determine whether removing bearings can be used, to check after you wash in the bearing.
　　Maintenance includes: monitor the operation condition, replenishment and replacement of the lubricant, demolished checks on a regular basis, this is the best running of machine maintenance conditions of operational standards, conducted on a regular basis. As a matter of maintenance in operation, there are rotating tone, vibration, temperature, lubricant condition, separation such as tapered roller bearings-bearings, rolling elements, the outer of the Raceway surface can be respectively checked.
　　Check on Raceway surface, rolling, the status of the mating surfaces, cage wear, TIMKEN bearing clearance increases injury exception of declining and has nothing to do with dimensional accuracy. Non-separation of small ball bearings, the inner ring with one hand supporting level, rotating outer ring to confirm fluency.
　　Large TIMKEN bearings because they cannot rotate, attention to check the rolling, Raceway, cage, ribs, noodles and other appearance, bearing shall carefully check the higher importance.
　　We use TIMKEN bearings, must be a scheduled maintenance and repair bearings, so not able to sustain performance bearings, but also to extend bearing life.

Previous: Ordinary maintenance of INA bearing four considerations described
Next: Common TIMKEN bearings which are corrosive

Hot Products:

Product Model	Inside Diameter	Outside Diameter	Thickness
23044CAE4 NSK	220	340	90
23944CAE4 NSK	220	300	60

【TradeBearings News Statement】

1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"TradeBearings".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.