Date: 2013-08-20

The bearing assembly Law bearing clearance adjustment

First, the assembly method
First, we look at our most commonly used methods: one is acetylene oxygen bearing directly heating; another oil immersion heating small bearings to thermal expansion, expand the bearing bore diameter, so that the assembly. These methods are widely used in the long-term maintenance of equipment, basically meet and solve the problem of the bearing assembly in the equipment maintenance. However, these two kinds of methods to ensure that the bearings in the heating process, the temperature of the heated area evenly, it is difficult to determine. Traditional acetylene oxygen heating are single gas burners and heating process is just a rule of thumb, the bearing temperature warmed to the number of degrees right difficult to grasp. So there have been difficulties encountered by the user.
Bearing axially closed or partly by radial tight fit method of mounting can be used when installing
The supporting parts of the machinery, the bearings should be in the radial, axial and circumferential (tangential) in three directions to obtain the positioning and fixing of the different requirements. Under normal circumstances, the axial direction of the bearing is fixed axially closed or partially with a radial tight fit to achieve the free side of the mechanism support bearing is often not to be fixed in the axial direction is installed in the axial direction to compensate for the body system or thermal dimensional change the swelling Lengsu process. Bearing radial and tangential fixing method, is generally achieved by the inner diameter of the bearing and the shaft outer diameter and bearing seat hole fits.
Second, the bearing clearance adjustment
Addition to the need to consider how to achieve positions of radial and axial positioning in the design of a combination of support, but also consider how to solve the problems of each bearing clearance adjustment.

Previous: Bearing noise and overheating causes
Next: Judged from the degree of bearing damage repair method

Hot Products:

Product Model	Inside Diameter	Outside Diameter	Thickness
7001ATYNDBLP4 NSK	12	28	8
7001A5TYNDBLP4 NSK	12	28	8

【TradeBearings News Statement】

1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"TradeBearings".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.