- Hello Customer - Log in or Register!
When we use the SKF bearing, if found it under conditions of high temperature, you get to stop operating, and then find out its causes, and provide solution for processing in accordance with the above, but may be due to heating in the bearings for different reasons, so solve in different ways, so it is to be treated on a case, the technician helps it.
When the SKF bearing temperature rise, first determine whether the malfunction, if it rises, should be dealt with as follows:
1, axle bearing installation location is not correct, might cause a large ball-end and bearing inner race and outer race retaining axial forces, cause bearing overheating.
2, the use of SKF bearings precision bearings provided for better choice.
3, the use of bearings in spindle not concentric bends or holes of the box causing the heating solution is to fix the spindle
4, bearing belt too tight causing the heating solution is to adjust the belt tension properly.
5, fever caused by poor lubrication of the workaround is to use code designation lubrication information and properly cleaned.
6 caused fever, low Assembly quality of the solution is to improve the quality of Assembly.
7, rolling bearing inner shell run around causing heating solution is to replace the wear of bearings and related parts correct balancing of the impeller diameter and checking static balance value
8, axial heating solution is caused by too much cleaning and aligning the sealing mouth ring clearance requirements
9, SKF bearing damage caused by fever's solution is to replace the bearings.
| Product Model | Inside Diameter | Outside Diameter | Thickness |
| NN3006MBKRCC1P4 NSK | 30 | 55 | 19 |
| NN3005MBKRCC1P4 NSK | 25 | 47 | 16 |