Item:T63 16.129*41.275*12.7 Bearing
Type: Auto shock absorber bearing
Lubrication: Oil or Grease
Dimensions: 16.129mm x 41.275mm x127mm/Metric
ID (inner diameter)/Bore: 16.129mm
OD (outer diameter): 41.275mm
Width/Height/thickness: 12.7mm

The single direction thrust ball bearing consist of a shaft washer, a housing washer and a ball and cage thrust assembly.

The bearings are separable so that mounting is simple as the washers and the ball and cage assembly can be mounted separately.

The types: bearings with a flat seat surface on the housing washer, bearings with a sphered seat surface and bearings with a sphered housing washer can be used together with a sphered seat washer

This type bearing can accommodate axial loads in one direction and thus locate a shaft axially in one direction. They must not be subjected to any radial load