- Hello Customer - Log in or Register!
Temperature of TIMKEN bearing, General bearing the room temperature, it can be inferred that if holes can be used to directly measure the temperature of the bearing outer ring, is a more suitable location.
Normally, bearings and bearing temperature began to rise slowly, 1-2 hours, to reach a steady state. Normal temperature heat capacity of bearings of the machine, cooling capacity, depending on the speed and load vary. If lubricated, install the appropriate Department, bearing temperatures will rapidly rising, stop running when the high temperature occurs, take the necessary preventive measures.
Operating temperature of TIMKEN bearings, temperature sensor, can be monitored at any time, and temperatures exceeding a specified value to prevent automatic alarm or stop burning shaft accident. Bearing high temperature often said that in special cases. High temperatures may also be harmful to TIMKEN bearing lubricant. Sometimes comes down overheated bearings the bearing lubricant. If the temperature exceeds 125 ° c or even less long bearing life. High temperature causes: insufficient lubrication or more lubrication, lubricant. Contains impurities, excessive load, damaged bearing rings, lack of space, and produce a high-friction oil seal.
Therefore, continuous temperature monitoring is necessary, whether itself or other important components of the measured bearing. If you are running under the same conditions, any temperature changes, can be said to have failed. Can an ordinary thermometer, digital thermometer, temperature measurement of bearing, bearings, can accurately measure temperature and the set temperature unit Celsius or Fahrenheit display. Importance of TIMKEN bearings, means when it is damaged, can lead to equipment downtime, the best type of bearing temperature probe should be installed.
| Product Model | Inside Diameter | Outside Diameter | Thickness |
| 4T-32205R NTN | 25 | 52 | 18 |
| 4T-32205 NTN | 25 | 52 | 18 |