- Hello Customer - Log in or Register!
Agency operation, install rod end of sites permitted a certain degree of temperature when touching body shell with your hands, infection should not feel hot as normal, on the other hand it indicates that bearings temperature through high.
Bearing temperature through high duanyou: lubricating oil quality differences or degenerate, lube oil viscosity through high body assembled too tight (open-idle is not sufficient), rod end bearing Assembly too tight; scroll bearing washer on the shaft or shell; load too large; bearing maintenance or fragmentation.
Bearing in the functioning of the Office are permitted in the tiny sound, if the sound is too large or unusual noise or impact sound, then the rod end bearing is faulty.
1, axle bearing for the maintenance, inspection, and exception handling
Good condition, for as long as possible to maintain the rod end function, maintenance, inspection, with a view to preventing accidents, it is imperative to ensure operational reliability, produced of sexual, economic progress. Maintains the best machinery operating premise work, on schedule. Contents include, supervision and operation, addition or replacement of lubricants, regular removal of the check.
As a matter of running test, a lubricant for bearings of rotating tones, vibration, temperature, status, and so on.
2, bearing failures and solutions
In General, if accurate spherical plain bearing rod end, you can use up to to fatigue life. But there are accident prematurely damage, not in use. This early damage and fatigue life, known as the quality limits of breakdowns or accidents. Result from the installation, use, don't look out on the lubrication from outside intrusion by foreign bodies, shafts, case study on thermal effect of inadequate.
| Product Model | Inside Diameter | Outside Diameter | Thickness |
| 6003T1XZZ NSK | 17 | 35 | 10 |
| 6302T1XZZ NSK | 15 | 42 | 13 |