- Hello Customer - Log in or Register!
1, choose clean, dry place SKF bearing, and maintain the necessary tools and workbench clean
2 Do not open before bearing mounting bearing packaging
3, the SKF bearing prior to installation, acceptance, or for any other reason without packaging, these approaches can be taken:
a If the bearing will be in a relatively short period of time is mounted, the layer on its outer surface coated with anti-rust oil, and placed in a clean container.
b If the bearings are not installed in the short term, on its outer surface coated with a layer of anti-rust oil and re-packaged in the original container.
Check the lubricant barrels, boxes, tubes or injectors are clean and / or closed, the test to confirm that the bearing block is clean and no cracks, no trace, burrs or any other defects.
5, greased, you might feel with new SKF bearing grease was not cleaned, bearing small or as high-speed operation, whether he refers lubricated with oil or lubrication, use the kerosene cleaning bearings or warm light oil to remove the anti-rust. SKF bearings with seals or dust cover, however, must not be allowed to carry out cleaning and heating.
| Product Model | Inside Diameter | Outside Diameter | Thickness |
| LM223016 NSK | 17 | 30 | 16.2 |
| LM2225 NSK | 17 | 29 | 25.2 |