Date: 2013-08-20

SKF Bearings Installation of the preparatory work and attention problems

A choice of installation site and requirements
The installation site should be some distance away from lathes, grinders and other machinery and equipment. The site should be clean, keep dry and clean, to prevent the iron filings, sand, dust, and moisture into the SKF Bearings.
2, the test Bearings models, ready to install the tool
SKF Bearings Inspection, the size meets the installation requirements, and select the appropriate assembly Bearings structural characteristics and co-ordinated with the various parts, ready to install the tools and measuring tools. Installation tool hand hammer, copper rod, sleeve, special plate, screw mosquito fixtures, presses, etc., the amount of vernier caliper, micrometer, dial gauge.
3, the test Bearings assembly surface
SKF Bearings assembly surface and co-ordinated with the surface of the part, if the bumps, rust layer, debris, sand, dust and soil exists, a Bearings installation difficulties, caused by incorrect positioning of the assembly; two of these attachments to the formation of abrasive easy to clean loss of the Bearings surface, affecting the assembly quality. Therefore, the pre-installation deal with journal, the surface of the Bearings shell hole, the end of the shoulder, and connecting parts such as bushings, gaskets, end with the surface, a careful inspection. If corrosion layer, can be used fine file file out, fine emery cloth polish, but also to clear the attachments on the Bearings assembly surface and its connecting parts.
Internally, the outer separable, SKF Bearings, not the outer interchangeable mistake so as not to affect the quality of contact. Bearings, rolling element Bearings shall be arbitrarily remove mix to avoid the installation location disorder affecting the accuracy.
View Bearings code, for ease of installing the SKF Bearings from Ann wrong side out of the Bearings ring should be typing layout and installation.

Previous: How to improve the actual installation of the INA Bearings with the precision
Next: SKF Bearings in failure early warning signals

Hot Products:

Product Model	Inside Diameter	Outside Diameter	Thickness
6316 NSK	80	170	39
6216 NSK	80	140	26

【TradeBearings News Statement】

1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"TradeBearings".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.