- Hello Customer - Log in or Register!
Precautions before installation
SKF Bearings packing and grease processing.
SKF Bearings rust after processing and packaging, less than the provisional installation, do not open the packaging. In addition, the Bearings coated anti-rust oil has good lubricating properties, may not have cleaned the direct use of SKF Bearings for general-purpose Bearings or grease filling. Instrument SKF Bearings for SKF Bearings, high-speed rotation, the application of clean washing oil anti-rust oil wash away, when the Bearings is easy to rust, can not be placed for a long time.
SKF Bearings and casing of test
Cleaning the SKF Bearings housings, and confirmation of no scar left by the machining burrs. Abrasive (SiC, Al2O3, etc.) sand, chip shell is strictly prohibited. Second test shaft with the drawings in line with the shell size, shape, and processing quality. Before installing the SKF Bearings in the shaft inspection and the shell with the surface coating machine oil.
SKF Bearings Installation Method
SKF Bearings installation method different Bearings types and to meet conditions. Due to the general axis of rotation, the inner ring and outer ring respectively interference fit and clearance fit, while the outer ring rotates, the outer ring using interference fit.
1, pressed into the installation
Pressed into the installation to the general use of the press, but also the use of bolts and nuts, hand hammer into mounted a last resort.
2, the heat sets of installation
SKF Bearings in oil heated to expansion and then mounted on the shaft of the heat can make the Bearings to avoid the unnecessary force in a short time to complete the installation.
Before and after use Notes summary
SKF Bearings and mechanical parts, high accuracy, so to be careful in the use and maintenance. Note the following and correct installation and use.
1, to keep the SKF Bearings and its surroundings clean
2, when used carefully, if used carelessly to Bearings a strong impact, make the SKF Bearings a scar, indentation, and fracture and other injuries.
3, using the appropriate installation tools
4, note that the SKF Bearings rust, avoid use in damp places, but also not to sweat stained, should wear gloves.
5, the user should first become familiar with the SKF Bearings
6 to develop operating standards used by the SKF Bearings
a SKF Bearings custody
b, SKF Bearings in and around cleaning
c, the size of the installation site, and processing quality inspection
d, the installation
e, after the installation inspection
f, for Demolition
g and maintenance (periodic inspection)
h, the lubricant added
| Product Model | Inside Diameter | Outside Diameter | Thickness |
| 6013 NSK | 65 | 100 | 18 |
| 16030 NSK | 150 | 225 | 24 |