Date: 2013-08-20

SKF bearings are three of the most effective methods of lubrication

For SKF bearings if in some environmental pollution are more serious in nature and is more humid, we would like to strengthen its lubrication, also is the only way to ensure that SKF bearings do not cause premature damage of the environment.
Three of the most effective methods of lubrication
1, immersion method: soak in rust-proof oils used in SKF bearings, so its surface to attach a layer of antirust oil method. Oil film thickness can be controlled through the rust-proof temperature or viscosity of the grease to achieve.
2, brushing method: does not apply for soaking or spraying of SKF bearings or bearings with special shapes, brush both pay attention do not produce rust preventive oil accumulation, should also pay attention to the prevention of missing coating.
3, spray method: some larger bearings cannot take the immersion method oiling, generally use about 0.7Mpa filtered compressed air pressure air spray cleaner places. Spray application of solvent-diluting antirust oil or thin-layer antirust oil, but must have comprehensive fire prevention and protection measures.
Four factors affecting SKF bearing life
SKF bearing cleanness of considerable influence on bearing life, we have conducted a special test, the result is more than their differences for several or even dozens of times times. Cleanliness of bearing higher, longer service life testing shows that different clean degree of effect of lubricating oil on ball bearing life considerably. Therefore, improving the cleanliness of the lubricant can extend bearing life and, in addition, lubricants containing dirt particles control in following 10um, bearing life into several fold increase.
Impact on the vibration of our test center test results showed that the vibration level of cleanliness seriously affect SKF bearings, in particular high-frequency vibrations more visible. Cleanliness of high speed bearing vibration values low, especially in the high frequency band.
Noise effect on bearing grease dust effects on noise test, proof of dust as much noise as possible.
Effect on lubrication performance of SKF bearings drop in cleanliness, not only affect the lubricant film formation, also cause modification of lubricating greases and accelerate their aging, thus affecting the grease lubrication performance.

Previous: INA bearing maintenance work and considerations
Next: Profiling techniques on the operation of SKF bearings

Hot Products:

Product Model	Inside Diameter	Outside Diameter	Thickness
23176CAE4 NSK	380	620	194
24076CAE4 NSK	380	560	180

【TradeBearings News Statement】

1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"TradeBearings".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.