- Hello Customer - Log in or Register!
1, peripheral removal
Remove the interference fit of outer ring, on the circumference of the shell is set in advance several extrusion screw screw in the outer ring, and equally tighten the screw. Demolition. The screw hole normally covered with a blind plug, separable bearings of tapered roller bearing of a vibrating screen, shell shoulders set several incisions, use pads, press remove, gently knocks or demolished.
2 bearings with a cylindrical bore, vibrating sieve removal
Removal of the inner ring, you can use the latest simple machine unplug the pressure. At this time, pay attention to the inner ring to sustain its force.
Large vibrating screen disassembly of the inner ring of the bearing with oil injection. By setting the hydraulic oil hole on the axis, so easy to draw. Width of bearing oil injection and extraction of fixtures and demolition job.
NU, NJ type inner ring of cylindrical roller bearing of a vibrating screen removal can take advantage of induction heating method. Jia Yi long to remind you: local heating in a short time, making drawing after the expansion of the inner ring.
3, taper bearing removal
Demolition of relatively small adapter sleeve bearings, by fastening them in supporting the inner ring on the shaft, the nut back after several, using hammers beating demolition for pad.
| Product Model | Inside Diameter | Outside Diameter | Thickness |
| 280TAC29D+L NSK | 280 | 380 | 120 |
| 260TAC29D+L NSK | 260 | 360 | 120 |