- Hello Customer - Log in or Register!
Majority should pay attention to problems of FAG bearings on the bearing being demolished, many people in the process of repair and maintenance of bearings, due to its own methods are not secure, a direct result of shortened service life of the bearing, or even unusable. These are possible.
For the FAG bearing removal issues to be aware of the following:
1, the outer ring of demolition: demolition of the interference fit outer ring in advance on the circumference of the shell sets the extrusion screw several outer rings with screws, and equally tighten the screw, while demolition. Blind plug the screw holes on the usual cover, FAG bearing, separable bearings, in setting shell shoulders several incisions, using the pad, press remove, or gently beating demolition.
2, disassembly of bearings with a cylindrical bore: demolition of inner ring, can pressure machine pull the latest simple. At this point, should pay attention to the inner ring to sustain its pullout.
3, demolition of bearings with a tapered bore: demolition of relatively small adapter sleeve FAG bearings, fastening in the inner ring of blocks supported on the shaft, the nut back after several times, using hammers beating demolition for pad.
FAG bearings for said demolition is geared for the small bearings, there are additional requirements for large bearings, everyone in operation it is important to note.
| Product Model | Inside Diameter | Outside Diameter | Thickness |
| 23996CAE4 NSK | 480 | 650 | 128 |
| 23292CAE4 NSK | 460 | 830 | 296 |