- Hello Customer - Log in or Register!
NSK Bearings support the main quality indicators radial clearance. The average radial gap passage to the inner and outer diameter and the drum in the general direction of the gap.
The NSK bearings gap is not the only accredited finished components supporting the finished NSK Bearings One of the main parameters of the qualifications, but also the impact on the work is an important factor. Gap does not meet the technical standards, reasonable the rolling load distribution will affect the rotation precision NSK bearings, vibration, life will be affected, thereby increasing the gap NSK Bearings, ensure that the pass rate is undoubtedly very important.
Quality NSK bearing clearance five factors. If you do not consider the material and environmental factors on the quality of the analytical instruments, process methods and personnel three quality NSK bearing clearance, NSK Bearings, support the outer ring and ball method internal and external channel the diameter deviation sort instrument and according to the value of the standard value of the inner diameter of the clearance channel, and the diameter of the outer channel, and then select the appropriate size of the ball, three Assembly, the upper and lower limits of the gap with the shaft of the axial direction of the gap tester, does not meet the technical requirements, and re-matching. The NSK bearing value of the radial clearance, the axial clearance value, it is difficult to ensure accuracy. Because the measured values of an axial gap is upward and downward limitation, due to the upper and lower limits of the size and curvature of each channel in different ways, so this NSK bearing radial matching the way of the passing rate is unstable . High and low the rework times more frequent product quality can not really get clearance.
| Product Model | Inside Diameter | Outside Diameter | Thickness |
| 55BAR10S NSK | 55 | 90 | 33 |
| 50BTR10H NSK | 50 | 80 | 28.5 |