- Hello Customer - Log in or Register!
Bearings when installing for the first time, I usually put on in the direction of load. When you reinstall roller bearing outer ring should be rotated 90 degrees, making the next loading. If you need detailed installation instructions can be provided together with the bearing.
When mounting double row tapered roller bearings and bearing components must be installed in the correct order. Part one-letter recognition. All part of the same bearing are marked with the same serial number, so that if several bearings are to be installed at the same time, no parts risk of confusion.
When mounting smaller TDI structures of bearings, noting the relatively thin intermediate rings do not occur as a result of extrusion deformation, such as when you tighten the bearing cover screws. This can lead to bearing small axial internal clearance or preload is too high. Therefore, the adoption of suitable bearings on the bearing cover the breadth of Jack, the bearing into the housing.
For mechanical systems, this means that every car spare parts, components and Assembly to achieve the lightest, most efficient and best hardness. Machinery group, the core parts are bearings. As rolling unit bearing contact surfaces between rotating and non-rotating, which are the key elements for the entire final installation size. For specific application requirements, and optimized bearing design to ensure that the entire Assembly is compact and effective.
| Product Model | Inside Diameter | Outside Diameter | Thickness |
| 6005T1X NSK | 25 | 47 | 12 |
| 6204T1X NSK | 20 | 47 | 14 |