- Hello Customer - Log in or Register!
FAG bearings checks, need to turn to determine times FAG bearing parts can be used again and record the use of good to bad.
Also carefully investigate and record split down the FAG bearing and appearance. In order to understand and the remaining amount of the lubricant of Inquiry, the sampling should be well cleaned click FAG bearings.
Followed by examination of FAG Bearings raceway and the rolling surface and the mating surface condition and cage wear state that there is no damage and abnormal situation in particular, to observe the trajectory of the raceway. Judgment bearings could be used again, and decided to come back to after considering the extent of bearing damage, machine performance, the importance of operating conditions, check cycle.
Inspection results, FAG Bearings damage and abnormal situation, in accordance with the phenomenon of bearing damage to identify the reasons and to develop countermeasures. Also, check the results, if you have the following defects, FAG bearings can not be used again, you need to replace it with a new bearing.
The inner and outer ring, rolling bodies, cage wherein any cracks and debris.
2 any of the inner and outer ring, the rolling body which has a peeling.
The inner ring inner diameter on the surface or outer ring outside diameter creep.
Raceway, rolling body rust and injuries.
5 raceway, ribs, rolling element significantly card hurt.
The rolling surface rolling on significant indentation Divots.
7. The cage badly worn or loose rivets powerful.
8. Overheating discoloration powerful.
9 grease seal FAG bearing seals and dust cover serious damage to
| Product Model | Inside Diameter | Outside Diameter | Thickness |
| RLM374730-1 NSK | 37 | 47 | 30 |
| RLM3730 NSK | 37 | 47 | 30 |