- Hello Customer - Log in or Register!
Rolling bearings but includes with related parts such as shaft and bearing housings. Lubricant is also a very important components of the bearing arrangement because the lubricant to corrosion-and wear-proof bearings to fully play its role. In addition seal seal performance is also a very important part of lubricant cleanliness is essential. Clean and has a profound effect on bearing service life that is why lubricants and seals have become micro-business is part of the cause.
Configuration in order to design a rolling bearing needs
– Select the appropriate bearing type and
– Determine the appropriate bearing size
But that's not enough. Also consider other aspects:
– For example, appropriate forms and other parts in the bearing arrangement design
– The correct fit and bearing internal clearance or preload
-My retention mechanism solution
– Appropriate seals
– Types of lubricants and doses, as well as
-Installation and removal methods.
Each individual's decision will affect the performance of micro-bearings of reliability and economy.
Effort required depends on whether there is a similar bearing matching experience. Encounter lack of experience cost of bearing arrangements and special requirements or need to give special consideration to any other subsequent appearance on more work needed to be done such as more accurate calculation and/or testing.
Comprehensive technology of chapters bearing arrangement design staff will see that according to the General requirements of the order and provide the necessary basic information. It is obvious it is not possible to every conceivable bearing application all the information you need is included. For this reason we are mentioned in more than one place full of mini-applications engineering services the service includes proper selection of bearings and a calculation of complete bearing arrangements and other technical support. For bearing arrangements in higher application specific technical requirements of using bearings limited, experience becomes more should take advantage of this service.
Comprehensive information is usually included in the technical sections apply to normal rolling bearings, or at least to a set of bearings. If you only want a particular bearing the exact classification of information in the appropriate sections found in the relevant text before the table.
Should pay attention to the load and speed values that appear in the product tables and the fatigue load limit values are rounded approximations.
| Product Model | Inside Diameter | Outside Diameter | Thickness |
| 10BGR02S NSK | 10 | 30 | 9 |
| 25BGR10X NSK | 25 | 47 | 12 |