Date: 2013-08-20

Measures to prevent deformation of bearing heat treatment

1. use of reasonable methods of cooling:
Metal quenching effect of cooling process after a deformation cause of deformation is also very important. Hot oil than cold oil hardening deformation is small, general control at 100 ± 20 ° c. Oil cooling capacity on the deformation is also critical. Influence of agitation and speed of quenching deformation. Cooling of metal heat treatment and the faster, more uneven cooling, resulting in greater stress, bearing more of the mold. On the premise of ensuring mold hardness requirements, as far as possible the use of cooling; adopting a classification of cooling can significantly reduce metal hardening heat stress and stress are effective ways to reduce some of the more complex shape workpiece deformation; some particularly complex or workpiece requiring high precision, using isothermal quenching can significantly reduce deformations.
2. the use of appropriate media:
Under the premise of ensuring the same hardness, as far as possible the use of oily media, experiments and practice has proved that the other conditions under the premise of no differences, slow cooling of the oil medium and aqueous medium cooling speed is relatively fast. Moreover, compared with oily media, significant impact of temperature change on cooling characteristics of aqueous medium, under the same conditions of heat treatment, oily medium water medium of bearing quenching distortion are relatively small.
3. reasonable part structure:
After heat treatment of metals in the cooling process, always thin some of the cold faster, thicker part of the cold slowly. In meet actual production needs of situation Xia, should as far as possible reduced workpiece thickness disparity, parts section seeks to uniform, to reduced transition area due to stress set produced distortion and crack tendencies; workpiece should as far as possible maintained structure and material components and organization of symmetric sexual, to reduced due to cooling does not are caused of distortion; workpiece should as far as possible avoid sharp edges, and Groove,, in workpiece of thickness junction, and stepped Department to has round corner transition; as far as possible reduced workpiece Shang of hole, and slot reinforced structure does not symmetric; thickness does not uniform parts used reserved processing volume of method.

Previous: High speed bearing wear is very sensitive
Next: How to choose a bearing and meet the changing needs of the

Hot Products:

Product Model	Inside Diameter	Outside Diameter	Thickness
7022A5TYNDBLP4 NSK	110	170	28
7022CTYNDBLP4 NSK	110	170	28

【TradeBearings News Statement】

1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"TradeBearings".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.