- Hello Customer - Log in or Register!
(November 19, 2010)
Metallized Carbon announces a silver-impregnated, carbon-graphite material for electrical applications such as air-traffic control radars, telecommunications systems and satellite communications.
Silver Metcar suits applications that require low resistance, low voltage drop and low electrical noise.
Ships, aircraft, rail systems, and other applications that require low electronic interference use the Silver Metcar material for DC motor brushes, non-welding electrical contacts and rotary slip ring brushes or contacts.
'With the growth of in-flight and at-sea television and internet service, we are seeing a huge increase in demand for the material for use in antennas used to track satellites,' said Matthew Brennan, chief operating officer of Metcar.
'Low-noise slip rings assemblies, known as rotary joints, microwave rotary couplings and RF rotary joints, are used to transmit minute electrical signals in rotating equipment such as microwave antennas, radar receivers, sonar receivers, rotating thermocouples read-outs and rotating strain gauge read-outs,' he added.
The carbon-graphite material in Silver Metcar provides self-lubricating properties and the pure silver provides high and constant electrical conductivity.
The material is corrosion resistant, dimensionally stable and has a heavy overload capacity.
Additives to the carbon-graphite base material improve its self-lubricating properties in the dry atmospheres that occur at high altitude and in space.
Silver Metcar cannot weld to another metal surface because the carbon-graphite base material will not melt.
It can be silver plated so it can be easily soldered to metal parts such as leaf springs or conventional brush holders.
To make the Silver Metcar materials, solid carbon-graphite base materials, in rings or blocks, are submerged in pure, molten silver.
The silver is forced into the porosity of the carbon-graphite material using extremely high gas pressure.
Most of the Silver Metcar grades contain approximately 50 per cent silver by weight.
X-ray inspection is used to ensure that each Silver Metcar part is uniformly impregnated with silver.
| Product Model | Inside Diameter | Outside Diameter | Thickness |
| NU2319 KOYO | 95 | 200 | 67 |
| NU319R KOYO | 95 | 200 | 45 |