Date: 2013-08-20

Maintenance of pumps of SKF bearings

1, new and used pumps, generally running must be replaced after 100 hours grease (oil), after every 500 hours of running 1.
2, Movement using grease lubrication SKF bearing, run after 1500 hours, grease should be replaced, raise should not be too much oil or too little because too much or too little grease will cause heating in the bearings, fuel generally lies in the 1/2~2/3 of bearing Chamber volume is appropriate.
3, for SKF bearings are lubricated by lubricating oil, oil should be added to the provision.
4, Sung to clean oil or grease container, usually be sealed well, there should be no dust, iron filings and other debris, so as not to damage the bearing.
5 generally use sodium grease, motor bearings, features of this grease is resistant against high temperature 125 ° c), but easily dissolved in water, so it cannot be used to pump SKF bearing lubrication.

Previous: Centripetal ball bearing
Next: Ways to prevent burning of SKF bearing in diesel engine

Hot Products:

Product Model	Inside Diameter	Outside Diameter	Thickness
6003T1XVV NSK	17	35	10
6302T1XVV NSK	15	42	13

【TradeBearings News Statement】

1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"TradeBearings".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.