- Hello Customer - Log in or Register!
FAG bearings lubrication at install time, many people do not see how, why to install when lubricated bearing it, what his role was, what the use, these are questions of our customers. Tell everyone exactly how one thing today.
In fact, FAG bearings installed when is lubrication, however, many bearing lubrication or sealing situations. We do not have lubrication. So how about lubrication of installed?
Installed in FAG bearings should be in a clean environment, tiny particles into the bearing will shorten the service life of the bearing. When you replace the bearing is very important to maintain a clean environment. Does not allow percussion hammer bearing, note bearings do not fall to the ground (or improper handling is similar). Prior to installation should check the shaft and bearing condition, even tiny wear can lead to poor fit, thus giving rise to the early failure of the bearing.
Many bearings are sealed, these bearings throughout the entire life of the period is not necessary and grease. Other seal bearing such as at the time of installation of double row tapered roller bearings must be grease lubricated. As the bearing cavity size different, it is difficult to determine how much additional oil, the most important thing is to ensure the grease in the bearing, if too many oils, when the bearing rotates, the excess oil can effuse. A general rule of thumb: at the time of installation, amount of grease to the bearing clearance of 50%.
FAG bearing to lubricate during installation, there is a reason is some bearings in the stored procedure, due to incorrect method, the bearing itself has caused a great deal of harm. So we must when bearings are mounted, check carefully whether lubrication is required.
| Product Model | Inside Diameter | Outside Diameter | Thickness |
| 24052CAE4 NSK | 260 | 400 | 140 |
| 23052CAE4 NSK | 260 | 400 | 104 |