- Hello Customer - Log in or Register!
Light Gears Offer High Strength
Brevini has combined the high efficiency, low weight, high reduction ratios of its planetary gear stages with the higher capacity, strength and durability of bevel helical gears to produce a powerful yet light and efficient hybrid design for medium to large sized industrial applications. The new Posiplan PH and BPH shaft-mounted range of gearboxes employs the planetary stages at the input end where higher speed and compactness are a major advantage and the helical stage at the slower, higher torque output side.
Jon Snaith-General Manager for Sales adds 'In the past some engineers have been reluctant to design a planetary shaft mounted gearbox into the machine because the driven shaft does not engage all the way through the gearbox'.'The Posiplan in contrast has a helical final stage reduction, thus removing this objection'.
Available in 10 motor harmonised sizes, the series has been developed not only to deliver more performance, but to also help increase motor efficiency and motor life by working with motor performance curves to optimise the most efficient working input speeds of common frame sized motors.
The high power-to-weight properties of Brevini planetary gearing enables both series of gearboxes to offer OEM designers a lighter and more compact solution than traditional helical and helical/bevel alternatives.
Offering nominal torque capacities up to 27,000Nm (soon to be extended to 67,000Nm), the Posiplan PH and BPH range of shaft-mounted gearboxes are suitable for use in applications such as bucket elevators, mixers, conveyors and crushers and are ideal for many other industrial applications requiring medium / low speed and high torque.
Using these gearboxes in a shaft-mounted configuration offers the flexibility of fitment in any orientation and can be used to replace high wearing / high maintenance exposed transmission alternatives such as belts, chains and pulleys.
You will be working with a global consulting and engineering company with an outstanding record of achievement.
Both contract and permanent opportunities exist for experienced 3D
Costs can also be reduced over worm/wheel transmissions due to higher efficiency operation, requiring a smaller motor to drive it as well as the actual units themselves being lower in weight and extremely price competitive.
The in-line Posiplan PH series provides benefits over traditional helical designs by offering ratios from 12:1 to 2000:1, within the one casing without the need for a 'plug-in' additional helical gearbox in the drive train.
The units provide an ideal solution for space and weight-restricted conveyor or mixer applications where designers need high levels of torque from a low-weight and highly efficient design.
The series achieves torque outputs ranging from 5.8 to 67kNm via single, double or triple-stage planetary inputs and a single stage helical output for shaft diameters of 70 to 140mm.
Offering similar levels of performance, the Posiplan BPH series provides reduction ratios of 30:1 up to 1000:1 as standard and are more suited to applications requiring 90 degree operation such as cranes, crushers, extractors or continuous extruding assemblies.
The smallest 29kW - 70mm output shaft version consists of a standard Brevini input with parameter optimised Gleason bevel gear assembly.
A single Brevini planetary stage further reduces transmission speeds to a final helical gear output.However, higher torque models (BPH20, 23 and 25) are supplied fitted with a single reduction planetary stage input or a two-stage planetary input for maximum speed reduction.
Long-life and high-efficiency operation of both gearbox designs is ensured by the specification of high speed bearings on the input shaft, taper roller bearings in the internal gearing to resist high thrust loads and oversized bearings on the output shaft to maximise rigidity.
Nitrile (NBR) labyrinth seals with separate grease-filled chamber protect against lubricant leakage and contamination, further prolonging the wear life of the gearboxes.The casings are all nodular grade cast iron.
Output options available include hollow shafts: cylindrical with keyway, cylindrical hollow shaft for shrink disc, as well as splined shafts - input variations include adapters for IEC, NEMA and hydraulic motors, flexible and fluid couplings, clutches and torque limiters and belt couplings.
| Product Model | Inside Diameter | Outside Diameter | Thickness |
| VSI200744N bearing | 648 | 816 | 56 |
| VSI200644N bearing | 546 | 716 | 56 |