Date: 2013-08-20

Led to increased bearing temperature check for attention problems

First: lubricating oil quality is worse? If the lubricant viscosity will cause bearing temperatures;
Second: If too tight bearing body Assembly, insufficient clearance will cause bearing temperatures;
Third: bearing too tight will cause bearing temperatures;
IV: the bearing ring on the shaft or in turn also led to increased bearing temperature;
V: bearing load too large will cause bearing temperatures;
Sixth: If bearing cage or scroll fragments, also results in bearing temperature.
Press bearing into bearing should rotate flexible sense of non-blocking. Subject to obvious turn flexible, then the axis dimensions are too large, tolerance to go down. Bearing onto the shaft turn by hand have significant "rustle" sense, the shaft tolerances may be too large or the roundness of the shaft well. So when the control shaft and housing tolerances to control the roundness, there are currently many of them only to control the tolerance, not to control the roundness.
Because the bearings are high-precision products, such as improper Assembly can easily cause damage to the bearing Raceway, causing damage to the bearings. Bearing Assembly should be dedicated mold, are somehow beating, only small forces when pressed into the shaft, pressure ring only ring force. Assembly required when using pneumatic or hydraulic, press-fit upper and lower die when outside in the level of State, such as tilt will cause damage to the bearing Raceway due to stress, the bearing rings.
Mount the bearing in rotor dynamic balance is easy to do on dynamic balancing produced when iron filings into the bearing, did before so it's best to be load bearing dynamic balancing. Some manufacturers in order to assemble, Assembly in the Interior bearing coated with some oil or grease lubrication, but often operators are difficult to control, if the oil or grease in the bearing room accumulates more easily along the axis of rotation of the bearing into bearing. The best bearing is not oil or grease, such as non-coating is not available to control shall not be bearing accumulates inside.
Paint rust is characterized by multiple sealed-type motor, motor Assembly has a good voice, but after some time within the warehouse, abnormal sound of motor and remove the bearing with serious rust. Many manufacturers are considered to be before bearing problems, through our advocacy, motor factory has now realized that largely insulated paint problems. The problem mainly because of the acidity of insulating varnishes containing volatile substances under certain temperature and humidity to form corrosive substances, corrosion, which cause bearing damage bearing Raceway. At present, the problem can only be a good selection of insulating varnishes, and after drying after a period of ventilation Assembly.

 

Previous: Bearing failure experience testing
Next: On the phenomenon of bearing temperature approach

Hot Products:

Product Model	Inside Diameter	Outside Diameter	Thickness
7009CTYNDBLP4 NSK	45	75	16
7008ATYNDBLP4 NSK	40	68	15

【TradeBearings News Statement】

1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"TradeBearings".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.