- Hello Customer - Log in or Register!
           | Type: INA Bearings for screw drives d 10 Tolerance: -0,008 D 28,14 Tolerance: +0,03 / -0,01 H 17,5 Tolerance: -0,5 A1 35 A2 35 B 16 Tolerance: +0,25 Daa min 26 Dai 22 d1 14,7 d2 4,5 da 12,4 m 26 n 26 rmin 0,3 X Axial abutment area of outer ring m 50 Mass Cr 7400 Basic dynamic load rating, radial C0r 3600 Basic static load rating, radial Ca 2550 Basic dynamic load rating, axial C0a 2420 Basic static load rating, axial nG Fett 5100 Limiting speed for grease lubrication MRL 0,12 Bearing frictional torque caL 26 Axial rigidity Statistically determined mean values from measurements on the complete bearing. Mm 0,0075 Mass moment of inertia for rotating inner rings 7 7 Axial runout The axial runout data for screw drive bearing arrangements are based on the rotating inner ring. ZM10 ZM10 Designation of recommended INA locknut The locknut is used to axially locate the bearing unit. It has no influence on the bearing preload. Locknuts must be ordered separately. MA 6 Tightening torque Only valid in conjunction with INA precision locknuts 4 x M4 4 x M4 Quantity x size of fixing screws to DIN 912 Tightening torque of fixing screws according to manufacturers data. Screws not included in delivery. |
| Product Model | Inside Diameter | Outside Diameter | Thickness |
| N413M bearing | 65 | 160 | 37 |
| N413F1 bearing | 65 | 160 | 37 |