- Hello Customer - Log in or Register!
           | Type: INA Axial conical thrust cage needle roller bearings d 6 D 35 The bearing outer ring is blue anodised. B 12 1) Lubricant feed Da min 21 d1 4,3 d2 20 d3 3,2 da max 11 H 22 H1 6 H2 8 J 28 m M6 t 14 W 2 Grub screw to DIN 913 m 38 Mass M4 M4 Fixing screws to DIN 912 Tightening torque of fixing screws according to manufacturers data. Screws to DIN 912 not included in delivery. Ca 3400 Basic dynamic load rating, axial C0a 7800 Basic static load rating, axial P 0 per = 0,5 x C 0a nG Fett 2000 Limiting speed MRL 2 Bearing frictional torque ATTENTION: For dimensioning, a starting frictional torque of 2 to 3 x M RL must be taken into consideration. The table values are guide values at a measurement speed of approx. 5 1/min. 0,03 0,03 Axial runout accuracy ATTENTION: For dimensioning, a starting frictional torque of 2 to 3 x M RL must be taken into consideration. The table values are guide values at a measurement speed of approx. 5 1/min. caL 350 Axial rigidity Mm 0,0066 Mass moment of inertia for rotating inner ring and integral setting nut Mm 2 Grub screw to DIN 913 KGT8X2,5 KGT8X2,5 Recommended ball screw drive to DIN 69 051 TR10X2 TR10X2 Recommended trapezoidal lead screw drive to DIN 103 The needle roller cages are made from plastic. Permissible operating temperature: +120°C (continuous operation) Tolerances of the adjacent construction: Shaft tolerance: h7 Thread tolerance: 6g (fixing thread on spindle for bearing inner ring) Housing tolerance: H8 |
| Product Model | Inside Diameter | Outside Diameter | Thickness |
| NN3015/P2W33 bearing | 75 | 115 | 30 |
| NN3015/P2 bearing | 75 | 115 | 30 |