- Hello Customer - Log in or Register!
INA Bearings are precision components, in addition to the lubrication of considerable attention and appropriate, but also in the process of INA bearings use, but also very cautious. Both high-performance INA bearings, if used improperly in the course of not only fail to achieve the performance, but it is easy to make INA Bearing damage, resulting in unnecessary losses.
Therefore, in order to avoid unnecessary losses in the use of INA bearings should note the following:
Try to keep the INA Bearing and its surroundings clean, even if invisible to the naked eye smile dust from entering the bearing, will increase the bearing wear, vibration and noise.
Second, when using the installation carefully does not allow a strong punch, does not allow direct percussion with a hammer bearing, does not allow the pressure by rolling the body pass.
Third, the use of appropriate and accurate installation tools to make use of special tools, try to avoid using the cloth and staple fiber and the like.
Prevent corrosion INA Bearing directly by hand to pick up the INA bearings to fully wash away the sweat of the hands, and coated with high quality mineral oil and then operate in the rainy season and summer, with particular attention to anti-rust.
However, in some special operating conditions, INA bearings can be obtained for a long life in the traditional computing, especially in the case of light load. These special operating conditions, when the rolling surface (track and rolling) to be an effective lubricant film separated and limit pollutants may cause surface damage. In fact, under ideal conditions, the so-called permanent INA Bearing life is possible.
| Product Model | Inside Diameter | Outside Diameter | Thickness |
| 6326 NSK | 130 | 280 | 58 |
| 6226 NSK | 130 | 230 | 40 |