Date: 2013-08-20

INA bearing using heat regular maintenance strategies

When you use INA bearings, if you want to ensure the safety of use, so be sure to check INA bearings, check the amplitude of vibration and sound, temperature, lubricant (color and viscosity change, and whether there is a foreign body). Remember that the amount of lubricant, make sure to moderate, much wasted less has no proper role, in the course of using, do not exceed the speed limit, due to overheating or burns result in damage if the temperature over 100 degrees, then each should be about replacing the oil 2-3.
1, forms of scales bearing size range, best applied in design of mechanical equipment scales bearing.
Its nature, size, direction is changing. Typically, the basic load rating are displayed in the dimension table. Axial and radial loads, and so on, INA bearing important factor is selecting the right also. When you are proportionate to the size of the ball and needle bearings, INA bearings typically have a higher load capacity and accommodate larger vibration and shock loads.
2, on the speed of the bearing, the bearing is depending on the bearing type, size, precision, cage type, load, lubrication, and cooling factors to determine.
3 to be applied, in some cases, INA bearing preload in order to increase rigidity, this procedure is typically used for deep groove ball bearings, radial ball bearings and tapered roller thrust bearings inner and outer rings bias, the shaft bent, shaft or housing tolerances change, with the error will cause the eccentricity of the inner and outer rings. To prevent the eccentric through Tai, self-aligning ball bearings, self-aligning roller bearings or spherical bearing is a better choice. Voice frequency and torque, INA bearings are manufactured at high-precision scales produced, so noise and small torque. Deep groove ball bearings and cylindrical roller combined bearings for low voice, low torque situations where there are special requirements.

Previous: FAG bearings check repairs problems
Next: TIMKEN roller bearing of damage causes for road noise method

Hot Products:

Product Model	Inside Diameter	Outside Diameter	Thickness
RLM2220 NSK	22	29	20
RLM2215 NSK	22	29	15

【TradeBearings News Statement】

1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"TradeBearings".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.