Date: 2013-08-20

INA bearing three large demolition

In the process of INA bearing in use, disassembly is very important. Need to pay attention to is the three large demolition. The three large bearings without removing correctly, the bearing is damaged, can not use.
In the demolition of the time, there is one very important point, must be in accordance with the drawings to the operation, do not own or operate. Give everybody introduction below respectively.
1, the INA of the outer ring of the bearing disassembly: removing the outer interference fit in the extrusion screw, several preset, use a screwdriver to the outer circumference side of the case, tighten screws evenly, and removal. These are usually cover screw hole plug, separated type bearings tapered roller bearings INA INA housing blocks in the shoulders set several incisions, pad, delete and press, or mining units.
2, INA bearings with a cylindrical bore bearing the demolition: demolition of inner ring, can be pulled out and the new simple mechanical pressure. At this point, we should pay attention to the inner strength to bear tension. The removal of INA bearing inner ring of the large-scale use of oil. Through the shaft hole is arranged on the oil, so easily. The width is large INA bearing and hydraulic fixture, in accordance with the law and pull, demolition operations.
3, INA bearing cone bearing the demolition : remove the smaller tight sets INA bearings, shaft and support the inner nut fastening piece, several times the file, tap the dismounting mat with a hammer. Large INA bearings, hydraulic disassemble easier to use, in the oil pressure, expansion of the inner ring, the cone disassembling bearing shaft hole method. In operation, the possibility that INA bearing suddenly appear, it is best to use nuts as well as file block.
In the process of removing INA bearings, if not the best professional personnel to operate, not penny wise and pound.

Previous: Use of cross roller bearing
Next: SKF bearing lubrication maintenance attention

Hot Products:

Product Model	Inside Diameter	Outside Diameter	Thickness
17BGR19H NSK	17	30	7
17BGR19S NSK	17	30	7

【TradeBearings News Statement】

1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"TradeBearings".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.