Date: 2013-08-20

INA bearing maintenance work and considerations

INA bearings after cleaning with a dry rag wipe dry, and then put in the antirust oil immersion. In this process, to bearing full contact with rust preventive oil, and keeps turning INA bearings, so as to enable the formation of oil-film antirust oil cover on a bearing surface, achieve the purpose of rust.
First place in gasoline cleaning bearings, wipe the residual sludge in the INA bearing and dust, where there was rust INA bearings with metallographic sandpaper gently wipe the Polish, up until the sense of touch is no rough.
Next use lithium grease, butter, evenly coated surface of the bearing you want, including the inner and outer rings, wheel, cage. Turn the bearing and is wiping edges, make the butter into the INA bearing, insufficient lubrication.
1. before measured INA bearings, must be measured surface clean and level surface to prevent incorrect or scraped surface measuring bearing.
2. when INA bearing measuring manipulation using a horizontal instrument must shake hands holding the instrument, do not touch bubble glass tubes and breathing bubbles with your hand as a precautionary level of reading accuracy. When watching level, bubble glass tube sight to align vertically, otherwise readings inaccurate.
3. at the time of measuring bearing, level to handle with care, being by itself, no measuring device on the surface level work surface drag drag to. When the beat pad, must pick up the level. When you check the vertical elevation device should force average close to the device on the facade.
4. when measured INA bearings, when levels get high temperature from the low temperature shall not be immediately used, or used under bright lights or sunlight. After use, with a fine cloth wipe, and coated with a thin layer of oil, put in the box with a private, for safekeeping.
Last operation was packed. In order to save costs, we "treasure", the warehouse shipment of cement packing bags, cropped to fit bags, INA axis contracted tightly, wrap, callout bearing specifications and puts it back to store shelves.

Previous: NSK bearing removal performance analysis
Next: SKF bearings are three of the most effective methods of lubrication

Hot Products:

Product Model	Inside Diameter	Outside Diameter	Thickness
23276CAE4 NSK	380	680	240
24176CAE4 NSK	380	620	243

【TradeBearings News Statement】

1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"TradeBearings".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.