Date: 2013-08-20

INA bearing grease bearing in mind that

　　Used on the INA bearing grease must have rust, rust can best do not dissolve in water. Oil should have a good report of them can form a thin oil film on the steel surface, even if grease is filled with water and can be maintained. Grease the machine will be softer, resulting in leaks.
　　Application example of when there is vibration, oil will be left to INA bearings, INA bearing block. If the mechanical stability of the grease is not, INA bearing oil will continue to be thrown out, which causes the mechanical understanding and collapse the structure of SOAP used oils were damaged.
　　1, through the surface feels INA bearing quality
　　INA bearing bright should be the kind of glossy black surfaces, this glossy black is INA bearing caused by the use of steel is standard and the grinding and cutting fluids are used, previously two of them.
　　2, chamfer is bright
　　INA bearing a chamfer does not determine the quality of INA bearing, but it reflects the INA bearing processing method. Chamfering is black to explain heat treatment such as quenching, so increasing the hardness of INA bearing, and some people think that the chamfers are black does not look good is not processed completely, this is a misunderstanding.
　　3, good one cage two-body, while the new technology uses one cage, but it just saves material, on rotation, and other properties than the difference of the two.
　　In General, the INA bearing service life and relationship factors 3, a INA bearing their quality. Second is to use the environment. Third, installation method.
　　There is the color way dimming of samples or thick, so may indicate that the oil has begun to carbide should be completely replaced the old lubricant. If possible, use fresh lubricant to rinse the circuit. When replacing the oil, the lubricant should be replaced to ensure that the new and old of the same model, adding that to meet the requirements of the oil level.

Previous: Influence of material properties on the INA bearing
Next: Common corrosion in NSK bearing failure analysis

Hot Products:

Product Model	Inside Diameter	Outside Diameter	Thickness
7028A5TYNSULP4 NSK	140	210	33
7028CTYNSULP4 NSK	140	210	33

【TradeBearings News Statement】

1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"TradeBearings".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.