- Hello Customer - Log in or Register!
SKF bearings have a rated life values, which are each bearing should existing parameters at the factory, but also face a number of external factors led rated life expectancy, and hence how to effectively extend the methods and measures of bearing.
1, SKF bearing installation
SKF bearing is properly installed, which will affect accuracy, longevity, performance. Therefore the design and Assembly departments for bearing installation the full study. Want to be installed in accordance with operational standards. Job standards projects often are as follows:
(1) clean bearing and bearing related parts;
(2) check the size and finishing of correlative parts;
(3) installation;
(4) once the bearing is installed check;
(5) supply of lubricants.
2, tuneup, straightening
In the bearing after installation, if not carefully tuned, straightening can lead to bearing subjected to additional loads, friction and vibration. These might accelerate fatigue and reduced bearing service life, and may damage the lifespan of the machine parts. In addition, vibration and friction may increase significantly increased energy consumption and premature failure risk.
3, basic condition monitoring
During use, often to monitor the bearings run basic external conditions, such as temperature, vibration and noise measurement, and so on. These regular checks for early detection of potential issues and prevent unexpected machine halt, make production plans to materialize, increase factory productivity and efficiency.
Once again, 4, lubrication
In the course of operation, SKF bearings require proper lubrication once again, perfect its performance. Bearing lubrication method, divided between grease lubrication and oil lubrication. For bearings properly to work functions, first of all, to select the appropriate conditions of use, the use of the purpose of lubrication method. If only consider lubrication, oil lubrication of lubrication advantage. But grease lubrication around bearing structure can be simplified like that.
5, the removed
When SKF bearing reaches its final age when they should be replaced. Although bearing can no longer be used, but correctly remove the bearings, replace new bearings in a timely manner, the new extension of the service life of the bearings can play a good role in promoting. First of all, properly removing the use of methodological tools will help prevent damage to the other machine components and, secondly, does not correctly remove the technique may cause harm to the operator.
| Product Model | Inside Diameter | Outside Diameter | Thickness |
| 232/800CAE4 NSK | 800 | 1420 | 488 |
| 231/800CAE4 NSK | 800 | 1280 | 375 |