Date: 2013-08-20

How to make quality TIMKEN characteristics of thrust ball bearings extend the life of some of the important factors

A thrust ball bearing selection stage, taking into account a number of factors (for example: load, hardness, operating environment, etc), TIMKEN bearings better design would first make the bearing reaches its maximum life values.
Second, the correct storage, thrust ball bearings before installing the best should be kept in their original packaging. Need to stay in a clean, dry and free of moisture, a relatively constant temperature environment. Shakes and vibrations may forever damage mechanical properties of TIMKEN bearings, so should be to avoid vibrations during processing and storage.
General level the bearings should be saved, after some heavier bearing vertical drop for a long time, deformation due to own weight!
Also, coated with grease (or seal) TIMKEN bearings require special care, because through the storage density after the oil change. When the bearing is used for the first time, there will be a certain degree of rotational noise. Therefore, set aside time for such bearings should be controlled according to the FIFO principle!
Three clean, which is very important to thrust ball bearings. Plane of rotation of the bearing rings are very smooth, very sensitive to damage caused by pollutants. Particles of impurities will be excessive rolling, rolling elements and partial pressure in the TIMKEN bearing, will eventually lead to permanent material fatigue.
Four fully installed equipment, thrust ball bearing appropriate tools should be used carefully installing and removing. should select the right tools! Industry experts estimate that premature failure of TIMKEN bearings, 16% were caused by incorrect installation. Generally a large number of installation, would normally take appropriate bearings installed devices.
But in the maintenance or replacement work, environmental diversity! Suggest that you, the relevant drawings, maintenance manuals, product specifications need to look at. TIMKEN bearing components must be kept absolutely clean!
Five and carefully thrust ball bearing installation and removal.
Six, the correct proper lubrication, lubricants, you can isolate the thrust ball bearing surface, which reduces the friction to protect metal parts and to prevent pollution and impurities. There are all kinds of grease can be used by different choice of operating conditions.

 

Previous: FAG cylindrical roller bearing temperature check for attention problems
Next: TIMKEN effect of application of heat treatment of bearing parts identification methods

Hot Products:

Product Model	Inside Diameter	Outside Diameter	Thickness
24124CK30E4 NSK	120	200	80
23124CKE4 NSK	120	200	62

【TradeBearings News Statement】

1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"TradeBearings".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.