- Hello Customer - Log in or Register!
Many bearings are used in an environment which is conducive to dust, dirt and grime. Because of this they usually need to be maintained at regular intervals to make sure they work correctly. Some bearing have shields which can protect the bearing to some extent. However, these still need to be maintained occasionally.
The shields on bearing can usually be removed easily. All you have to do is insert a clean knife carefully under the shield and prise it away. When you clean the shields make sure you use a solution which doesn’t contain a solvent based product as it can damage the rubber. When they are removed however the bearings can be cleaned as you wish. A good way to clean a small bearing is to place it in a jar of cleaning solution, and with the lid tightened, which can be agitated to remove the grease and grime.
The solution can be changed a few times and the bearing shaken until no grease or grime remains and the cleaning solution remains a clear colour. After the bearing is completely dry you can relubricate the bearing with the recommended lube or grease and refit the shields.
Posted by BeiEr Bearing Supplies
| Product Model | Inside Diameter | Outside Diameter | Thickness |
| 6003 NSK | 17 | 35 | 10 |
| 16003 NSK | 17 | 35 | 8 |