• Hello Customer - Log in or Register!
Date: 2016-07-14

Franke-Filter successfully equips one of the largest pump-storage power plants in Eu

Oil Mist Separators from Franke-Filter have proven to be compliant with the high requirements of the pump-storage power plant Vianden in Luxemburg.

The pumped-storage power plant of the Société électrique de l′Our (SEO) on the river Our with a turbine power output of 1300 MW was commissioned in 1964. Several oil mist separation systems have been tested; however, none fulfilled the high requirements presented. The goal was to filter the oil mist escaping through the turbine bearings and exhaust the filtered clean air directly into the machine room. This would prevent the need for long, costly piping and eliminate uncontrolled leakages. This task required a very high filtration efficiency (>99%) of the Oil Mist Separator. Further tasks included the possibility of exact adjustment of vacuum in the lube oil tank as well as at the separate bearings.


In 2003 the company Franke-Filter supplied the first Oil Mist Separator for a 1-year test period. After successful results and inspection by “TüV Süd”, Société électrique de l′Our (SEO) ordered Franke-Filter Oil Mist Separators for all 9 horizontal turbine sets. 

Oil Mist Separators are designed individually to suit the systems and conditions on site. Two Oil Mist Separators were installed per each machine set. One Oil Mist Separator provides the necessary vacuum in the lube oil tank, whereas the other is connected via a 4-fold Manifold to the 4 bearings (generator, turbine, coupling and end bearing). At each of these bearings vacuum can be adjusted individually.

Furthermore, in order to regulate and monitor the filtration process, for each machine set there was delivered a switchboard which light signals permanently indicate the status of the corresponding subsystem delivered. Integration to the monitoring system informs personnel on site about possible failures.
Also two further vertical pump-turbines, commissioned in 1976 and 2015 , were subsequently equipped with Franke-filter separators. Needed here was only one separator for the filtration of the exhaust air and simultaneous generation of vacuum.

Advantages of the Franke-Filter Oil Mist Separator at a glance:

• Air can be directly exhausted into the machine room (Filtration >99%)
• 1 Filter for 4 bearings
• Individually adjustable vacuum for each bearing
• Maintenance-free operation up to 3 years
• Easily accessible for prompt maintenance works
• Connection to the control centre

For further information about Oil Mist Separators please visit the website: www.franke-filter.com or write directly to: info@franke-filter.de

About Franke-Filter:
Back in 1989, the company was founded in Holle as FRANKE Mess- und Filtersysteme. It was focussing on the manufacture of customised, high quality oil mist separators for power plants and turbine manufacturers in Germany and its neighbouring countries. With its relocation to Bad Salzdetfurth in 1996 - a brand new office and assembly hall were erected - and its change of name to FRANKE Filter GmbH in January 2001, the clean solution could be offered to customers in Europe and all over the world. 
At FRANKE Filter we are committed at providing you with active environmental protection. In order to achieve the best possible results we manufacture according to the most up-to-date standards. Being both the designer and a specialised manufacturer of oil mist separators FRANKE Filter has gained valuable experience for more than 25 years through personal customer contact for all conceivable applications concerning separation of oil mist.
(openPR)


Previous: Ingeteam wins contract to monitor 550 MW of wind turbines
Next: TimkenSteel to Announce Second-Quarter 2016 Financial Results on July 27

Hot Products:
Product Model Inside Diameter Outside Diameter Thickness
NAO-30×45×13 NTN 30 45 13
NAO-29×42×13 NTN 29 42 13
【TradeBearings News Statement】

1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"TradeBearings".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.