Date: 2013-08-22

Formal Assembly and disassembly, and maintenance skills of SKF bearings

1, release the retention bracket bolts. Is in need of attention before the end of the SKF bearing removed. I should be the opposite end of the shaft bearing bolt to prevent each bearing strength and destruction of others on both sides.
2, with a hex wrench, loosen the bearing SKF lock nail, and then covered with small bars to the eccentric sink hole on the axis of the beat eccentric, first.
Many people use the bearing installed improperly mounted, the SKF bearings are damaged. Therefore, how to correctly install the SKF bearing it? Want a more comprehensive awareness of mounting and dismounting of bearings:
For bearing rings to the proposed finish, corrosion and creep resistance of thin layer, friction between the mating surfaces to prevent corrosion of gap.
The correct installation, SKF bearings to use is very important. Hope that we can use the correct installation method at a later time.
Installation, depending on the type and size, select mechanical, hydraulic or heating methods. Impose mandatory installation on the bearing, not from one to another via rolling bearing ring rings of SKF bearings, otherwise it may damage the runway. But in any case, you cannot directly mining bearing ring, cage, rolling element or sealed.
Install
3. Load eccentricity. Condoms in the first step and along the axis of the eccentric bearing SKF hands tighten. Then insert a small rod or put it in the sink hole subjected to eccentric. Bishop percussion along small steel rod axis. Eccentric collar securely finally eccentric hexagonal lock screws.
4. SKF bearings are fixed, do not tighten the bolts, coat the bearing can be rotated within the bearing. Then tighten the bolt a good relationship. Also installed with shaft bearing and seat, rotate the other end of the shaft, the bearing SKF automatically find their location.
5. As the bearings and bearing lubricant finish,. Then assemble bearings SKF bearings and bushings. Push-installed to the location you want.
6. SKF bearings on the shaft before installing, you must unplug the SKF bearing jacket pins, in the Editorial Department of journal surface polishing and lubrication (shaft bearing to allow slight rotation) smooth and clean, oiled rust.  

Previous: Spherical roller bearing vibration measurement and simple diagnosis
Next: FAG bearing steel smelting requirements for high technology

Hot Products:

Product Model	Inside Diameter	Outside Diameter	Thickness
4T-30305D NTN	25	62	17
4T-30305C NTN	25	62	17

【TradeBearings News Statement】

1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"TradeBearings".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.